Recovered files often won't open because data recovery software could only rescue what was still readable on the disk. Files that were fragmented, partly overwritten or sitting on bad sectors come back with the right name and size but damaged contents. First, check that the recovery itself was done properly: run it again to a different drive, try a deeper scan, and avoid writing anything new to the source drive. Then repair the files that are still damaged with file repair software, which rebuilds documents, photos, videos and archives from what survived.
Recovery and repair are two separate jobs. Recovery gets the file back off the drive. Repair fixes the file once you have it. Many people get stuck because they expect one tool to do both.
Why recovered files are damaged
| Reason | What you see | Can repair help? |
|---|---|---|
| The file was fragmented and recovery joined the wrong pieces | Office errors, photos that change halfway down, videos that stop or glitch | Often partly; the readable parts can be saved |
| Part of the file was overwritten by new data | Gray or corrupted sections, missing pages, archive CRC errors | The surviving parts can be saved; the overwritten part is gone |
| Bad sectors on a failing drive | Blocks of zeros, gray bands in photos, freezing video | Yes for the readable parts; re-recovering with a slow, careful scan may help more |
| The file was already damaged before it was lost | Same errors as any corrupt file | Yes, treat it like any other damaged file |
| Recovery from a raw scan with no file names | Files called things like file0001.jpg, some with the wrong type | Check the type first; many are actually fine |
| A video recorded when the card failed or the power cut out | Large MP4 or MOV that plays nothing | Often fully, with a sample video from the same device |
Step 1: Make sure the recovery was done right
Before you repair anything, rule out problems with the recovery itself. Repair works on what you give it, so a better recovery means a better repair.
- Never recover to the same drive. Saving recovered files onto the drive you are recovering from overwrites the very data you are trying to rescue. Use a separate internal or external drive.
- Try a deeper scan. A quick scan relies on the file system's records. A deep or signature-based scan reads the whole disk and can find files the quick scan missed or got wrong.
- Image a failing drive first. If the drive clicks, disconnects or reads very slowly, each attempt may make it worse. Copy it once to an image file with your recovery software, if it supports that, then recover from the image. For a drive making mechanical noises, a professional lab is the safer choice.
- Check the file type. Files recovered without their names may have the wrong extension. A file that will not open as a JPEG might actually be a PNG or a video.
File Repairer is not data recovery software. It cannot find deleted files or read a failing drive. Use your recovery tool first, save the results to a healthy drive, then repair the files that will not open.
Step 2: Sort what works from what doesn't
A big recovery can produce thousands of files, and opening each one by hand is slow. Instead, drag the whole recovered folder into File Repairer and use Tools > Check Files for Damage. It marks every supported file as Damaged or No damage found without changing anything, so you can focus on the ones that need work and stop worrying about the ones that are fine.
It checks Word, Excel and PowerPoint files (including old .doc, .xls and .ppt), PDFs, JPEG, PNG, HEIC and camera RAW photos, MP4, MOV, AVI and MKV videos, and ZIP and RAR archives. The supported file types table has the details.
Step 3: Repair the damaged files in one batch
- With the damaged files loaded, click Repair All.
- Choose where repaired copies go: a folder you pick, or a "Repaired" folder next to each original. Repaired copies get " (repaired)" in the name and nothing is overwritten.
- Preview the results. Documents, spreadsheets, slides, PDF pages, photos, video frames and archive contents can all be checked before saving, with a "what was recovered" panel for each one.
- Save the ones you want. An optional repair report lists what happened to every file.
Each file ends up with one of these results:
- Repaired or Partly repaired: the file was rebuilt. Partly repaired means some content was missing from the recovered file and could not be brought back.
- No damage found: the file looks fine. If it still will not open, check its type or the program you are using.
- Needs a sample file: common for videos and some JPEGs. Add a working file from the same camera, phone, drone or dashcam and File Repairer uses it to rebuild the missing structure.
- Text extracted: the document was too damaged to rebuild, so its readable text and data were saved to a new file.
- Failed: not enough of the file survived. A deeper re-recovery may give a better starting point.
What to expect for each file type
Documents and spreadsheets
Office files are ZIP containers, so a recovery that got most of the pieces right can usually be rebuilt with text, formatting, tables, images and formulas. Where pieces are missing, you get what survived. See repairing a corrupted Word document for the built-in options as well.
Photos
A recovered JPEG that is gray or garbled from partway down has lost data in that area. File Repairer keeps the good part and can optionally crop away the gray. For camera RAW files that are too damaged, it can rescue the full-size preview image embedded inside. More in our guide to repairing corrupted JPEG photos.
Videos
Recovered videos often lose their index, so players show nothing even though the footage is there. Rebuilding the index, with a sample video from the same device where needed, often brings back both picture and sound.
Archives
Intact files inside a damaged ZIP or RAR are kept exactly as they were, and damaged ones are recovered as far as possible and marked "(partial)".
Be realistic about partial results
If part of a file was overwritten before you recovered it, that data no longer exists anywhere on the disk, and no recovery or repair tool can recreate it. A good repair keeps every surviving piece and makes the file open again. For the most important files, check whether a copy exists elsewhere first: an email attachment, a phone backup, OneDrive, or a camera card that has not been reused.
Checking, repairing and previewing in File Repairer are free, so you can see exactly what is recoverable from your rescued files before deciding whether to save the repaired copies with an Installation Key.
Frequently asked questions
Why do recovered photos show a gray bottom half?
Part of the photo's data was missing or overwritten on the drive, so the image stops partway. The top part can usually be saved, but the missing area cannot be recreated.
Should I run data recovery again or repair the files?
If many files are damaged, try a deeper scan to a different drive first, because a better recovery gives repair more to work with. Then repair whatever still won't open.
Can File Repairer recover deleted files?
No. It repairs damaged files you already have. Use data recovery software to get deleted or lost files back, then use File Repairer on the ones that won't open.
